Introduction to Device Attachment
To attach your device to the Mount'n Mover system, you will need to determine how your device can attach to the Quick Release Plate (QRP). Some devices attach directly to the QRP and others require an additional device specific attachment plate.
Device Attachment Guide
Dynavox - EyeMax
Step 1: Attach the Adhesive Backed Cushion Pad
Peel off the backing, and carefully stick the cushion pad directly below the serial number window.
- adhesive backed cushion pad
Step 2: Position the spacers
Position two spacers over the threaded holes in your device.
- two 0.125" thick plastic spacers
Step 3: Loosely attach two main screws
By hand, loosely thread the two larger screws into the device, sandwiching the spacers with the plate
- two #8-32 x 0.625" pan head screws
Step 4: Loosely attach the two top screws
By hand, loosely thread the two smaller top screws into the device threads.
- two #4-40 x ½" pan head screws
Step 5: Tighten all four screws
Now that all four screws are aligned and have begun to thread - tighten all four using a screwdriver.
Step 6: Attach the QRP
Attach the Quick Release Plate using the four shorter screws.
- four #8-32 x 3/16" flat head screws
If you do not see your device here, please let us know. We want to help.