Deluxe Plexiglass Laptop Tray (TR-LT)
Step 1: Loosen the straps
Loosen the corner straps and unbuckle the long strap with buckle to allow the laptop to be slipped in.
Step 2: Insert the Laptop
With the laptop open, slip it over the backstops and under the long strap.
Step 4: Position the Laptop
Position the laptop so that it sits against the laptop tray lip, roughly centered on the tray.
Step 5: Cinching the corner-straps
Tighten both corner straps using the barrel-loc fasteners.
To use the barrel-loc fasteners, depress the button (by pinching it) and then pull the straps to tighten.
Step 6: Cinch the center-strap
Clasp the center strap using the buckle, then tighten by pulling the open end against the buckle.
Optional: May not apply to all laptops
Adjust the back-stops to press-up against the rear of the laptop.
Step 7: Done!
Mount and Mover Quick Release Plate (QRP) Attachment to 12 x 12Trays with 3 inserts
With the QRP attached lower on the tray, the Mount'n Mover controls are positioned closer to device access.
With the QRP attached higher on the tray, this allows a more "lazy-susan" style, where the wrist rotation corresponds closer to the center of the tray.
You are now ready to use your device with the Mount'n Mover!