Simply plugs into 3-prong charging socket of wheelchair. No
installation required. Perfect for parents of children in power
wheelchairs! Radio Frequency (RF) means line of sight is not required.
Stop a rambunctious child from entering the street when you are still inside the
Make ANY ability switch wireless! Can also turn any switch into a latching
switch or a 3 minute timed switch. This RF Wireless Ability Switch Kit includes
a 2 Button Wireless Remote RF Transmitter with a 3.5mm female socket into which
you can plug any of Broadened Horizons Adaptive Ability Switches, or those of
another manufacturer. The ability switch jack activates the larger round
button on the remote which you can also push with your finger. The remote
contains a small battery common to these type of keychain remotes that will
typically last for six months to a year. Replacement batteries can be
found at your local hardware store.
The kit also includes a RF receiver which plugs into the device you are
controlling with your ability switch. When you activate your ability
switch, the remote transmitter will send a radio frequency (RF) signal to the
receiver which then activates the switch enabled device you are controlling. RF
signals will travel through walls and other objects. The Four output modes
are available: 1 second, momentary, latching, or 3 minute timer.
The RF Wireless Ability Switch Receiver pictured below can be plugged into
any wall outlet using the included 12VDC Power Supply. If portability is
needed, an optional 12V Li-ion Battery Pak is available from Broadened
Possibilities: Broadened Horizons can also switch enabled the second button
on the remote allowing one remote to activate 2 receivers, or up to 6 remotes
can be used to activate 1 receiver such as having a sip�n puff switch plugged
into one remote on your bed, and a second remote on your wheelchair armrest.
Additional remotes are available with one, both, or none of the buttons switch
enabled as well as 4 and 8 button remotes.
- Ships with one pre-programmed 2 Button Remote Transmitter and Power
Adapter that plugs into wall outlet
- Supports up to 6 remote transmitters
- 4 distinct switch modes: Momentary, 1 Second, Latching, and 3 Second
- Power supply (receiver): 12 VDC 10mA max.
- Frequency: 310MHz
- Dimensions: 2.8" x 2" x 1"