Please Login or Register
Translate: en_US
USD ( $ )
0Items in your cart
Cart Subtotal: $0.00
Click thumbnails to zoom & pan

Wheelchair 3/8in Slide Track T-Slot Nut

Be the first to review this product

Availability: In stock

$12.95
 
OR

Quick Overview

for wheelchairs with slotted seat frame (specify w/c model)
Thread Size: 1/4"-20 Slot Width: 3/8" (A) 9/16" (B) 15/64" (C) 3/8" (D) 9/16"

About the Wheelchair T-Nut (WC-TN)

The wheelchair T-Nut is used to attach to Pride Mobility (Quantum and Jazzy) and Invacare chairs with slide tracks.
You can attach Wheelchair Brackets directly to the WC-TN, or you can use other accessories for more positioning options.

Dimensional Drawing  

Dimensions

  • Long Double:  A: 5/8  x  B: 1/4"  x  C: 3/8"  x  D: 2.5"
  • Short Single:  A: 9/16  x  B: 15/64"  x  C: 3/8"  x  D: 9/16" 

Hardware A: Two 1/4"-20 x 7/8" Bolts and Two 1/32" thick washers for attaching BlueSky Designs Adjustable Wheelchair Bracket (WB), or other adapter plates to the T-Nut (WC-TN) Hardware B: Two 1/4"-20 x 5/8" Bolts for attaching a solid Wheelchair Bracket (WB2) to the WC-TN

T-Nut (WC-TN)
Wheelchair T-Nut (WC-TN)

Slidetrack-Rail Illustration
Slidetrack Rail Example

 

 

 

 

 

 

Attaching a T-Nut to Slidetrack

Slidetrack-Rail Line Illustration
Tools needed:
  • 3/16" Hex Key (provided with every Mount'n Mover)

Attachment Instructions
  1. Remove the cap/cover for the seat rails to gain access to the slidetrack.
  2. Insert the T-Nut into the slidetrack, then slide it to the desired position within the track. You may have to move existing hardware around for best placement.
  3. Align the attaching component with the holes of the T-Nut. This component should be oriented to best suit the users needs.
  4. If the attached component is the WB2 (Solid), then use Hardware B. Otherwise, use Hardware A.

Example 1: Mounting to a Slidetrack frame that typically is at an angle.

side view: mounted slidetrack using a TN and WB(adjustable)   side view: mounted slidetrack using a TN and WB(adjustable)  

This primary operating position for this client was tilted at a slight angle.
To maintain a vertical post, the WB (adjustable) was used.

Components used: Wheelchair T-Nut (WC-TN), Adjustable Wheelchair Bracket WB(adjustable)

Example 2: Mounting to a Slidetrack frame that typically is at an angle.

side view: mounted slidetrack using a TN and WB(adjustable)   side view: mounted slidetrack using a TN and WB(adjustable)  

Mounted similarly to the set-up shown in Example 1, this client had an additional ECU display that was not obstructed.
In addition to this wheelchair, the client had a manual tilt-in-space wheelchair that was also mounted to.
This enabled him to have full access to his device in either chair, without changing any settings.

Components used: Wheelchair T-Nut (WC-TN), Adjustable Wheelchair Bracket WB(adjustable)

Example 3: Mounting to a Slidetrack frame where the push-up post is obstructing ideal mount placement.

side view: mounted slidetrack using a TN, WCLAE and WB(adjustable)   front view: mounted slidetrack using a TN, WCLAE and WB(adjustable)   top view: mounted slidetrack using a TN, WCLAE and WB(adjustable)  

Refer to the center picture, where the post would sit outside of the armrests but still within the wheelchair footprint.
This scenario required the use of a Wheelchair L-Angled Extension Plate (WC-LAE) to offset the post mounting.
A WB(adjustable) was used, but a simpler set-up could be accomplished using the the WB2(Solid).

Components used: Wheelchair T-Nut (WC-TN), Wheelchair L-Angled Extension Plate (WCLAE), and the Adjustable Wheelchair Bracket WB(adjustable)

Example 4: Mounting to a Slidetrack frame where a large laptray is obstructing ideal mount placement.

side view: mounted slidetrack using a TN, AP, Two WCLAE(s) and WB2(Solid)   front view: mounted slidetrack using a TN, AP, Two WCLAE(s) and WB2(Solid)  

This client had a large laptray that they wanted to dodge, which requirements an extra offset
Using two WC-LAE components and a WC-AP, the mount was offset roughly 5" outside of the seat rail.
We do not recommend using more than two WC-LAE components for offsets, as this severly increases the moment arm on the support.

Components used: Wheelchair T-Nut (WC-TN), Wheelchair Adapter Plate (WC-AP), two Wheelchair L-Angled Extension Plate (WCLAE), and a Solid Wheelchair Bracket WB2(solid)

These are only a few examples of how some people have successfully mounted to their wheelchairs.
We understand that every case is different, so If you have any questions about mounting or the Mount'n Mover contact us

Outdoor Answers
Sort by
Most Recent Questions
Expand all
Tell us what you think about this item!

Specifications

SKU MtT1056.p
Weight 0.5
Free Ground Shipping No
Flat Shipping Rate No
Includes No
Brand Broadened Horizons
Product Label No
Dimensions Thread Size: 1/4"-20 Slot Width: 3/8" (A) 9/16" (B) 15/64" (C) 3/8" (D) 9/16"
Warranty 1 Year
Availability Next Business Day by 9:30 AM
Shipped from Partner Warehouse No
Harmonization Code No
Barcode No
By Disability or Limitation No
by Ability or Control Method No

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  Loading...